Description
Clausing Atlas 6EVSQ with Electronic Inverter Drive
12″ x 58″ New Clausing Vertical Mill Atlas Model 6EVSQ40S Specifications:
Table& Ways | |
Table Size | 12″ x 58″ |
No. of T-slots | 3 |
T-slot Width | 5/8″ |
T-slot Center Distance | 2.48″ |
Table Ways | Dovetail |
Knee Ways | Square |
Column Ways | Square |
Travels | |
X Longitudinal (Manual) | 35″ |
X Longitudinal (Auto) | 33.46″ |
X Axis Rapid Speed Inverter Drive | 2000mm/rpm |
X Axis Rapid Speed Servo Drive | 3750mm/rpm |
Y Cross | 14.4″ |
Knee | 17.1″ |
Knee Lifting Motor Speed | 430mm/rpm |
Ram | 20″ |
Motors & Spindle | |
Spindle Motor | 5 Hp |
Amp Draw 208v | 7 |
Amp Draw 230v | 7 |
Amp Draw 460v | 5 |
X Axis Motor | 1/2 Hp |
Knee Axis Lifting Motor | 1 Hp |
VS Spindle Spd rpm (Mechanical/EVS) | 60-4300 / 60-4300 |
Low Range (Mechanical/EVS) | 60-500 / 60-500 |
High Range (Mechanical/EVS) | 500-4300 / 500-4300 |
Main Spindle Taper | NMTB40 |
Spindle Travel | 5″ |
Quill Feed (in/rev.) | 0.0015/0.003/0.006 |
Quill Diameter | 4.13″ |
Construction & Weight | |
Column Turret Diameter | 14.96″ |
Knee Width | 15.35″ |
Column Bearing Length | 34.84″ |
Saddle/Table Bearing Length | 38.5 |
Ram/Turret Bearing Length | 26.39″ |
Ram Length | 45.1″ |
Table Load | 1,200 lbs. |
Net Weight | 3,938 lbs. |
Height (A) | 94.62″ |
Depth (B) | 88.08″ |
Width (C) | 77.56″ |
Table to Spindle (D) | 1.97″ – 17.71″ |
45° Inward (E) | 3.9″ – 23.19″ |
Spindle Ø to Column (F) | 10.41″ – 32.46″ |
45° Outward (G) | 12.09″ – 34.13″ |
Head Tilt (H) | 90° right to left |
12″ x 58″ New Clausing Vertical Mill Atlas Model 6EVSQ40S Standard Equipment:
- Meehanite Castings for superior rigidity and wear resistance
- Spindle run out 0.0002
- Hardened & Ground, X, Y & Z Ways
- Column & Knee Ways Covers
- Precision ball screws on X and Y axis
- T-slots are ground to provide reference edge for positioning your workplace
- Hardened & Ground Table Surface
- Hardened & Ground Spindle
- Chromed & Ground Quill
- Precise angular contact spindle bearings, P47210 for high accuracy and heavy duty cutting
- Coolant System w/Pump & Switch
- Flexible Segmented Coolant Nozzle
- 5/8″ – 11 Drawbar w/NMTB40 Spindle
- 5 Hp AC Motor
- AC Rapid Vertical Drive (knee)
- Variable Speed Drive
- Variable Speed Drive
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Lever-operated manual rapid quill movement
- Handwheel for fine quill feed
- Adjustable automatic feed disengagement for quill feed in both directions
- Micrometer depth stop
- Reversing switch for clockwise or counter clockwise operation
- Full Electrics w/disconnect switch
- NMTB40 Spindle
- Spindle Brake (Hand operated)
- Auto timed lubrication pump
- LED Work Light
- Leveling bolts and pads
- Tool Kit, Test and Accuracy Chart
- Operations Manual/Parts List
- 6VSQ Series Standard 230 Volt 3 Phase (other voltages require a transformer or special order)
- 6EVSQ Series Standard 230 Volt 3 Phase (other voltages require transformer or special order)
12″ x 58″ New Clausing Vertical Mill Atlas Model 6EVSQ40S Optional Accessories:
6VS001M | Chip Tray | $560 |
6VSQ012 | Table Guard (factory install) | $1,100 |
6VSQ012A | Table Guard Safety Door Interlock | $220 |
6VSQ8440 | Pneumatic Power Draw Bar NMTB40 State CAT40 if required | $1,560 |
Draw Bar Installation | $350 | |
6VS040M | 4″ Riser Block | $770 |
6VS041M | 6″ Riser Block | $830 |
6VS042M | 8″ Riser Block | $900 |
6VSQ050S | Extra Servo Drive for X, Y Axis Simultaneous Movement (S-series only) | $1,890 |
6VSQ-CE | CE Electrics w/Spindle Guard (factoryt order) | $1,170 |
2VS002A | Central 110V Wiring Point w/6 Plugs & 8′ Power Cord | $265 |
2VS010 | 52 Piece Clamping Kit | $195 |
2VS022 | NMTB40 Milling Chuck Kit w/7 Collets | $690 |
2VS020A | 1/4″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
2VS020B | 5/16″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
2VS020C | 3/8″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
2VS020D | 1/2″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
2VS020E | 5/8″ Milling Chuck Collet Only (2VS030, 21, 22) | $50 |
2VS020F | 3/4″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
2VS020G | 1″ Milling Chuck Collet Only (2VS020, 21, 22) | $50 |
FV-9010G | Kurt 6″ Vise Only | $1,025 |
FV-9011G | Kurt 6″ Swivel Base for FV-9010G | $730 |
FV-9012G | Vise Step Key Kit 11/16 x 5/8 (set of 2) | $95 |
FV-9030G | 1/2″ Keyless Drill Chuck | $230 |
FV-9032G | 1/8″ to 5/8″ Keyless Drill Chuck | $240 |
SM1303 | 208v to 230v Transformer | $1,605 |
6VSQ-TRANS | 460v to 230v Transformer | $965 |
6VSQ-460 | 460V Inverters (factory order) | $1,445 |
DRO KITS | ||
AR16-36-200M | 2 Axis 10″ x 54″ TBL Acu-Rite 200 DRO | $2,360 |
AR16-36-300M | 2 Axis 10″ x 54″ TBL Acu-Rite 300 DRO | $2,830 |
AR4-16-36-200M | 3 Axis w/Spindle 10″ x 54″ TBL Acu-Rite 200 DRO | $2,925 |
AR4-16-36-399M | 3 Axis w/Spindle 10″ x 54″ TBL Acu-Rite 300 DRO | $3,400 |
NOTE: Acu-Rite edge finder requires 300 DRO kits | ||
NW16-36-NMS800 | 2 Axis 10″ x 54″ TBL Newall DRO | $2,375 |
NW6-16-36-NMS800 | 3 Axis w/Spindle 10″ x 54″ TBL Newall DRO | $3,155 |
FG16-36-PKMC | 2 Axis 10″ x 54″ TBL Fagor DRO 40i | $2,360 |
FG16-36-PKM | 2 Axis 10″ x 54″ TBL Fagor LED DRO 20i | $1,850 |
FG06-16-36-PKMC | 3 Axis w/Spindle 10″ x 54″ TBL Fagor DRO 40i | $2,925 |
FG06-16-36-PKM | 3 Axis w/Spindle 10″ x 54″ TBL Fagor LED DRO 30i | $2,640 |
DRO 2 Axis Installation | $500 | |
DRO 3 Axis Installation | $650 | |
DRO 4 Axis Installation | $800 |
About Us
Worldwide Machine Tool is the leader in providing full sales, parts and service, financing, transportation and training of new and used machine tools for chip and fabrication clients across the United States, Canada and Mexico. Our warehouses and office is located just minutes north of Columbus, Ohio. With over 28 years of experience in the industrial machine tool industry, we have the knowledge and expertise to provide our customers with the best customer service, support and technical expertise on all new and used machine tools to meet their needs.
We buy and sell new and used ironworkers, shears, lathes, milling machines, drills, saws, press brakes, routers, turret punch models, presses, welders, deburring and beveling machines, plate rolls, laser, waterjets and associated tooling and accessories. We take pride in being a trustworthy partner that our customers rely on through the years. Our experienced sales team would love to help you with your next machine tool purchase. Give us a call today or Request A Quote. Call 614-255-9000 or Contact us today to experience the Worldwide Machine Tool difference.
Check us out on Twitter, Facebook, Youtube, and Instagram.
Worldwide Machine Tool LLC.
Terms and Conditions: https://www.worldwidemachinetool.com/terms-conditions/